◈@motortrail

Dashboard warning lights: which ones need action before your MOT

Few things unsettle a driver more than a dashboard light that stays on after the engine starts. Some warnings can wait a few days, others need a quiet word with a mechanic, and a handful mean the car should not move at all. For anyone with an MOT coming up, knowing which lights are a fail risk and which are advisory saves time, money and a wasted trip to the test centre.

The MOT test checks a long list of items, and the dashboard itself is one of them. If a warning lamp for a critical safety system stays illuminated when the ignition is on, the car fails. That applies even if the underlying fault is minor. The rule is simple: a light that should not be on is a fail. So, what do the symbols mean, and which ones demand immediate attention?

The reds: stop or fail

Red warning lights indicate a problem that could affect safety or cause serious damage if you keep driving. The most obvious is the brake system warning. It usually means the handbrake is on, but if it stays lit after releasing the brake, the system has detected low brake fluid, worn pads or a hydraulic fault. Brakes are a core MOT item, so this light alone will cause a failure. If you see it, check the fluid level when the engine is cold. If the reservoir is low, topping it up might turn the light off. If it stays on, book a garage visit before the test.

Another red light that deserves respect is the engine temperature warning. It shows a thermometer in liquid, often coloured red. If this comes on while driving, the engine is overheating. Continuing can warp the cylinder head or blow a gasket. The MOT examiner will look for signs of overheating, such as steam or coolant leaks, but the light itself is a fail if it is on during the test. Let the engine cool, check the coolant level in the expansion tank, and look for obvious leaks. If the level is fine and the light stays on, the thermostat or sensor could be faulty. Either way, get it sorted before the MOT.

Battery charge warnings are also red on many cars. A steady light means the alternator is not charging the battery properly. The car might start and run for a short while, but eventually the battery will go flat. The MOT does not test battery charge directly, but if the light is on the examiner will notice. More importantly, a dying battery can cause the car to fail the emissions test if the engine cannot reach the correct operating temperature. A red battery light is a strong hint to visit a garage.

Dashboard warning lights: which ones need action before your MOT

Amber and orange: caution, not panic

Amber or orange lights are less urgent but still matter for the MOT. The most common is the engine management light, often shaped like an engine block. It can mean anything from a loose fuel cap to a failing catalytic converter. The MOT test includes an emissions check, and if the engine management light is on the chances of a clean exhaust reading drop significantly. The car may still pass if the light is on but the emissions are within limits, but many examiners take the light as a sign that something is wrong. It is worth having the fault code read at a garage before the test. Sometimes the fix is simple, such as replacing a sensor, and the light goes out.

The tyre pressure monitoring system light, usually a cross-section of a tyre with an exclamation mark, is another amber warning. It means one or more tyres are significantly underinflated. Underinflated tyres increase fuel consumption, reduce grip and wear unevenly. The MOT checks tyre condition, tread depth and inflation, so a car with a pressure warning is likely to fail if the tyre is visibly low or has uneven wear. Check all tyres with a gauge and inflate them to the manufacturer's recommended pressure. If the light stays on after inflation, the sensor battery may be dead, which is not a fail but is worth fixing.

Green and blue: normal operation

Green and blue lights are usually indicators that a system is active, such as headlights or cruise control. They do not affect the MOT. The only exception is a green light that should not be on, such as a headlamp beam symbol when the lights are off. That would suggest a wiring fault, but it is rare. Generally, green means go, and the examiner ignores it.

Lights that are not obvious

Some cars have warning symbols that are less common. A coil spring symbol with a person sitting on it means the suspension or seat belt pre-tensioner has a fault. Suspension condition is part of the MOT, so a warning light here could mean a failed shock absorber or a broken spring. Both are fails. A steering wheel with an exclamation mark indicates a power steering fault. The car might still steer but will feel heavy, and the examiner will notice if the steering is stiff or noisy. A fail is likely.

Modern cars also have a light for the exhaust gas recirculation system, often a symbol of a pipe with arrows. This is part of the emissions control. If it is on, the car may fail the emissions test. A garage can check the EGR valve and clean it if needed.

What you can do yourself before the MOT

A quick walk around the car can save a lot of trouble. Start with the dashboard. Turn the ignition to the on position without starting the engine. All the warning lights should illuminate briefly and then go out. If any stay on, note the symbol. A red light that stays on after the engine starts is a fail almost every time. An amber light is a risk. If you are unsure what a symbol means, the owner's manual has a full list.

Check the brake fluid level and the engine coolant level. Both are easy to see through the translucent reservoirs. If either is low, top up with the correct fluid. For brake fluid, use the grade specified in the manual. For coolant, use a 50/50 mix of antifreeze and water or a pre-mixed product. Never remove the radiator cap when the engine is hot.

Dashboard warning lights: which ones need action before your MOT

Check the tyre pressures, including the spare if the car has one. The correct pressures are on a sticker inside the driver's door or in the manual. Use a reliable gauge. Also check the condition of the tyres for cuts, bulges or uneven wear.

If the engine management light is on, a simple check is to tighten the fuel cap. A loose cap lets fuel vapour escape and can trigger the light. If that does not work, a garage can read the fault code. Many independent garages offer a free or low-cost code read.

For all of these checks, the advice from Pentland Press News car servicing guidance is the same: if a light stays on and you cannot fix it yourself, book a visit to a qualified mechanic. The cost of a pre-MOT check is usually much less than the cost of a retest.

When to call a professional

Some dashboard lights point to problems that need a trained eye. The brake system warning, if it stays on after topping up the fluid, could mean a worn brake pad or a hydraulic leak. Both are safety-critical and require a garage. The engine management light, if it does not go out after a fuel cap check, needs a diagnostic tool. A flashing light means a serious fault that could damage the catalytic converter, so stop driving and call a mechanic.

The airbag warning light is a red or amber symbol of a person with a seatbelt. If it stays on, the airbag system has a fault. The MOT checks that the airbag warning light works correctly: it should come on briefly and then go out. If it stays on, the car fails. Airbag faults are not a DIY job. A garage can reset the system or replace a faulty sensor.

For drivers in Scotland, where independent garages are often the first port of call, getting a pre-MOT check is straightforward. Many garages offer a quick look at the dashboard lights as part of a service. The Pentland Press News car servicing guidance emphasises that a small investment in a pre-MOT check can prevent a failure and the need for a retest, which costs time and money.

Dashboard warning lights: which ones need action before your MOT

Final checks on the day

On the morning of the MOT, start the car and let it run for a minute. Watch the dashboard. All lights should go out within a few seconds. If any stay on, particularly a red one, consider postponing the test until the fault is fixed. Driving to the test centre with a warning light on is not illegal, but it will almost certainly result in a fail. A quick call to the garage to reschedule is better than wasting the test fee.

If the car has a service interval reminder, such as a spanner symbol or the word "service", that is not a fail. The examiner ignores service reminders. However, if the reminder is accompanied by a red warning, the reminder is irrelevant.

The dashboard is the car's way of talking to you. Before an MOT, it pays to listen. A few minutes spent checking the lights and acting on them can make the difference between a pass and a failure. And if in doubt, a visit to a trusted garage is the safest bet.

Pentland Press News on social media Facebook

◈